Best Lotos Plasma Cutters – Reviews And Buying Guide

Lotos is fantastic in the world of plasma cutting. There have been some posturing items from Lotos that has provided with its best. Makers have given considerable effort as well as modern technology, making something unique via its procedure.

Lotos plasma cutters have permitted both specialists and fans to endure even more accuracy and support in their welding jobs. Though welding is dangerous, it is necessary to have a plasma cutter that carries out well as well as is risk-free to utilize. When we concentrated on these rules, we discovered Lotos to be among our favorite plasma cutter brand names. They are reliable, top-notch, protected, and sturdy.

As Lotos supplies various plasma cutters, we picked the best three Lotos Plasma Cutters as well as assessed them, to ensure that you will certainly need to look no further to choose which version is the very best alternative for you! Whether you are a hobbyist or a professional, you will find the best design for your job.

So, what are you expecting? Read along to find out which Lotos Plasma Cutter is the perfect fit for your needs.

Best Lotos Plasma Cutters

1. Lotos LTP5000D

2. Lotos LTP5000D Pilot Arc Plasma Cutter

3. Lotos LTPDC2000D

4. Lotos LT3500

Lotos Plasma Cutters Reviews

1. LOTOS LT5000D 50A Air Inverter Plasma Cutter

Best For Most People

This version is an electronic inverter plasma cutter having dual voltage as its input (110/220 volt). The current circulation is 50 amps, which is much more than a conventional plasma cutter. Consequently, this item can be detailed as one of the very best reliable ones in plasma cutting. Each other remarkable aspect of this issue is that you could likewise utilize DC power source for this plasma cutting procedure.

If you are working at 40 Celsius temperature level, the results can be at 60 %. It means that you’ll rise to 60 % performance out of this product when you have a room temperature level of more than 38 Level Celsius. When your working temperature level is higher than typical, you’ll have your equipment to a bit extent where you’ll discover it a bit sleazy.

Pros

  • Industrial-grade plasma cutter
  • Comparable and accurate flame for precise cutting
  • Grater cutting ability than required
  • Extendable duty cycle
  • Regular duty cycle at the identical AC frequency level

Cons

  • Short Electrical Cord
  • The consumables lead to finish out quickly
  • Less soft cutting issues in related the LTP5000D unit

The air conditioning system is among the primary requirements of a plasma cutter. As this tool is a sturdy tool as well as handle a bunch of warmth inside on the specimen to work with, it must have a sustainable cooling setup inside it. The device can also get warm and break down the entire process.

Well, the Lotos LT5000D has obtained PAPST sophisticated German cooling system inbuilt that makes this item increasingly more steady.

The maximum density this item could deal with quickly is 1/2″. On the other hand, the maximum severance density for this equipment is 3/4″. Both of these worthy are higher than essential. The intent, you are to cut a steel sheet of 1/2″ thickness. It isn’t an incredibly easy task to manage. It requires a bunch of focus and power to do so. The Lotos LT5000D being an excellent Lotos device does this activity excellently.

Regarding cutting steel sheets, there are different ones. For light steel sheets, it can take up to layers of 16 mm density. You should not head the torch for as well lengthy to reduce, however quickly like a pencil. For stainless-steel as well as aluminum sheets, this Lotos plasma cutter can conveniently occupy to 12 mm thick layers. However, all of these operations are performed at the 50-amp cutter result.

The measurement of this product is 381 mm X 152.4 mm X 304.8 mm. The weight of this item is just 10.2 kg. It is not also hefty, neither too light. The plasma cutter review with it will reveal you all the describing’s of this product weights consisting of or omit the needed cablings, and nozzles.

Cleaner cut is specifically what all the consumers need as well as this item ensures that the flame is balanced as well as exact. The lantern is constructed with special care, and also the nozzle via it is secure.

The Lantern figure is versatile. It might be extremely beneficial when you are up to do under-car molding or welding cuts. Repairers have lots of need for such tools. Then why not have your very own?

2. Lotos LTP5000D Pilot Arc Plasma Cutter

With Lotos LTP5000D arc plasma cutter, there is no need to added an electric connection to your working sampling. The LTP5000d produces direct current powerful enough for different jobs. It defines that you can openly move here and there within your functioning boundary; that could be inside your garden, your basement, anywhere. But the sampling to work with will indeed consistently be divided from the reducing plasma circuit.

The pilot arc will light with excellent gas pressure at the lantern nozzle. When you trigger it, you’ll obtain your cutting fire with a quite exact as well as a high beam. It also has twin voltage facilities, 110 volts at 60 Hz with a twine converter.

Pros

  • Lightweight, compact, and portable.
  • Very strong
  • Practical, reliable, and faster cuts.
  • Consumables are very affordable.
  • It can cut several types of metals.
  • Protected and comfortable.

Cons

  • The delay is ready to get to the material quickly.
  • Torch trigger is not guarded
  • May need to buy a pigtail if using with 110V

It is a compact and portable Lotos plasma cutter that has aired from a compressor. It is fitted with cutting through steel plates, aluminum, copper, and much less residue. The tool can cut within rigid, rusty, and colored surfaces.

It can be run at 110v at 50Hz frequency or 220v at a 60Hz rate. Nonetheless, you will have to obtain a pigtail if you want to use the 110 voltage. The double voltage ability functions immediately. It will be no changing of the electric atmosphere. All you must do is to plug it. The device will instantly select the right voltage.

Eventually, pilot arc plasma cutting is the procedure of steel cutting that is like a one-person. The highlight of this Lotus plasma cutter is that the sampling, to work with is not straight in touch with the cutter, the pilot arc with a tweaked arc cuts take place quite precisely.

Consumable Usage

We have discovered with the Lotos LTP5000D is it is over ordinary use consumables. If you want to minimize this, be sure there is sufficient airflow. We recommend you acquire an added set of consumables from the very beginning. The consumables are moderately valued, so they will not spend a lot.

Pilot arc plasma cutting is the procedure of reducing steel sheets with much less time, just reducing with much less possible slags as well as cleans, more complete and much deeper cut, beautiful cut with a thin line.

The duty cycle 60% at 50A.

This device utilizes the MOSFETS transistor that can generate a consistent outcome through high and low power uses when cutting various issues as well as multiple densities. The ltp5000d has powerful cutting performance due to numerous cutting highlights. It is marketed with a plasma torch, air regulator, ground clamp with cord, pipe, and hose attachments. It likewise applies the PAPST breakthrough German cooling technology that supplies the optimum optimization of the cutter methods. LTP5000D can reduce an optimum density of 1/2″ and also thickness of 3/4″.

Protection

This item is protected for cutting. The pressed air utilized for cutting does not have any result in wellness. When you use this device, you will not expose yourself or others around at some risk.

Sturdiness

The LTP5000D is very sturdy as a result of the metal products for the casing. The metal covering secures integral parts of the equipment from scratch. Even if it gets revealed to a severe setting or infected area, the inner pieces are well preserved.

3. Lotos LTPDC2000D

Best For Experienced Welders

The LTPDC2000D is our first pick for experienced welders, as it is a 3-in-1 option. It can be used for plasma cutting, stick welding, or Tig. You will get tidy and powerful cuts if you use this machine. Even if the LTPDC2000D is one of the most costly on our list, the features deserve every penny.

With the LTPDC2000D, you obtain three products in one device for an excellent rate. Experienced welders will enjoy the flexible usage they can get out of this item.

Each of the welding purposes is reasonably effective and specific.

You will cut through metals approximately 1/2 inch in thickness with security as well as accuracy. The LTPDC2000D can quickly deal with steel, molybdenum, stainless steel, and ferrous alloys. It is is a dual voltage model.

This version is rather risk-free. The cooling system guarantees that the device will certainly never be warm.

Lastly, LTPDC2000D is a resilient choice. The device is built from a Durable Infineon IGBT Power Drive matrix, which assures strength to damage and hence a much longer life span. A 1-year warranty backs the LTPDC2000D.

The pilot arc attribute of this model makes sure tidy and also effective cuts, making it an exceptional alternative for sturdy usage. You can use it for sturdy steels, without generating much spatter.

The Lotos plasma cutter is extremely easy to move. You can begin welding with a unique flip of the switch behind you have set it. The movable lantern head performs procedures in restricted areas basic. It is movable, which enables welding experts to bring it to task jobs without an inconvenience.

Pros

  • The plasma cutter supplies 50 amps.
  • The TIG welder features 200 amps.
  • The stick welder comes with 200 amps.
  • Very safe to use.
  • Easy to move.

Cons

  • The LTPDC2000D is the most expensive referral on our checklist.
  • It would be best if you additionally bought the consumables.
  • You may need an expansion for a higher wheelchair in welding.

4. Lotos LT3500

Best On A Budget

The Lotos LT3500 is our preferred economical choice. It is an excellent choice for home use. It is likewise portable, to ensure that you can utilize it to make up any little issues around your home. The price is less than $200.

The LT3500 is a cheap and sensible selection for smaller welding jobs, supplying it a lot for residence usage. The item has 35 amps that can conveniently cut into metals as much as ⅖ inches in density. They can cut copper, aluminum, stainless steel, alloy steel, or moderate steel.

In addition to its other high features, this design is straightforward to use, to ensure that beginners as well as Do It Yourself fans can take pleasure in welding effortlessly. The device can be set up in 1 min.

Pros

  • Long-lasting
  • Suitable set-up
  • Not expansive and powerful
  • The LT3500 is portable.
  • Automatic dual frequency
  • 1-year guarantee

Cons

  • Not suitable for heavy-duty use
  • Not authoritative for any kind of thicker metals thicker
  • Generate more spatter than other Lotos plasma cutters

Final Thoughts

Are you looking for a low-cost Lotos plasma cutter to use on weekend break jobs? Do not wish to invest a great deal of cash on a professional device? The LOTOS LTP5000D must be your first option. You will get pilot-arc as well as dual voltage abilities that you can not find in any other device in this cost array. There is a 1-year guarantee. It proves to be the best Chinese plasma cutter on the marketplace.

If the LTP5000D is the very best alternative for enthusiasts, the LTPDC2000D is the very best selection for professional welders, as it incorporates three welding choices in one equipment. The LTPDC2000D gives a terrific advantage for your money. It is the very best pick for heavy-duty use.

The LT3500 is our chosen budget-friendly selection. We consider it is the best portable Lotos plasma cutter for small house repair services, or Do It Yourself jobs. The design is very light as well as quickly mobile so that you can easily carry it from one space to another.